Make sure this is done on the local computer and not the cloud PC.
This section is to check if you already have printers.
If you know you have printers added or are not sure, continue following through otherwise skip to Step 4
1. Click on the Windows logo on the bottom left hand corner and then click on the cog wheel to open up settings.
2. Click on Devices and then Printers & Scanners
3. If you have printers, please click on the printers and then click Remove device.
4. Once the printers have been removed, press the Windows key and the letter R at the same time to open the Run dialogue box. Please type \\150.150.205.133 into the box and press enter to bring up the available printers.
5. Right click on the Canon(Colour) and click on Connect, please repeat for the Canon(Mono) printer as well. If the printers fail to add, please restart your pc and then try again.
6. Once the printers have been added, you will need to disconnect and reconnect to your Cloud PC. If the printers are not on the Cloud PC after reconnecting, you will need to restart the Cloud PC.